Testimonials

MSHA Accident Report: November 23, 2020

  Houston Plant, Harris, TX – November 2020

MINE FATALITY- On November 23, 2020, a miner was electrocuted while troubleshooting a disconnect box for the classifier drive motor. The victim had the electrical disconnect box open and the main power supply was not deenergized.

“Best Practices” provided from MSHA:

  • Ensure electrical circuit components are properly designed and installed by qualified electrical personnel.

  • Ensure electrical troubleshooting and work are performed bypeople with proper electrical qualifications. Positively identify thecircuit on which work will be conducted.

  • Before performing electrical work, locate the visual disconnectaway from an enclosure and open it, lock it, and tag it, to ensureall electrical components in the enclosure are de-energized. Verify by testing for voltage using properly rated test equipment.

  • Wear properly rated and well maintained personal protective equipment, including arc flash protection such as a hood, gloves, shirt and pants.

  • Train miners on safe work practices for electrical equipment and circuits.

 

Click here for the full report from the United States Department of Labor

OSHA ACCIDENT REPORT: Employee Is Killed When Boom-Lift Basket Touches Powerline

Accident: 125063.015 – Employee Is Killed When Boom-Lift Basket Touches Powerline

Accident Investigation Summary:

At approximately 12:00 a.m. on March 26, 2020, an employee was electrocuted and killed after the employee raised JLG boom-lift basket that he was occupying, came in contact with an energized, primary electrical distribution power line. The employee did not maintain at least 10 foot clearance from the energized powerlines, and the employee did not complete the training in relevant safety related work practices.

 

Click here for the full accident & inspection details

OSHA ACCIDENT REPORT: Employee Contacts Energized Circuit And Is Electrocuted

OSHA ACCIDENT REPORT: Employee Contacts Energized Circuit and is Electrocuted

Accident: 118245.015 — Report ID: 0521700 — Event Date: 07/20/2019

Employee #1 and two coworkers, employed by an electrical services company, were installing wiring and Acuity Brands BLT/BLC LED Luminaire lights in a school classroom.
Employee #1, an electrician, was working from an 8-foot fiberglass ladder and checking an installed light that had shorted out. Coworker #1, the crew foreman, went to turn off the breaker that supplied power to the classroom. Before the power stopped transmitting to the room, Employee #1 made contact with an energized circuit, sustained an electrical shock, and fell from the ladder. Employee #1 was transported to the hospital, where he was pronounced dead from electrocution.

Click here for the full accident report details from OSHA.gov.

Not reporting workplace injuries is a red flag to OSHA

Questions have arisen about whether the Trump administration has weakened the OSHA electronic injury reporting rule because there appear to be few (if any) penalties tied to not reporting. That’s changed. 

First, some background on who’s been reporting injuries electronically to OSHA and the apparent (lack of) consequences for not complying.

OSHA expected about 460,000 establishments to file the electronic forms. Just under 249,000 did – a 54% compliance rate.

The consequences for not filing were minor. OSHA can only cite employers for alleged reporting violations less than six months old. And when OSHA has cited employers for failing to file forms, it’s been classified as an other-than-serious violation, the lowest category with the lowest (if any) monetary penalty.

But a consequence of not reporting has just been announced in OSHA’s new Site-Specific Targeting (SST) Program. OSHA will target high injury rate establishments in manufacturing and non-manufacturing sectors (but not construction).

Reason not to report, right? Not necessarily, because OSHA will also inspect employers the agency believes should have provided Form 300A data electronically, but didn’t for calendar year 2016 injuries.

Therefore not reporting may actually increase a facility’s chance of getting visited by an OSHA inspector.

OSHA says in its announcement about the new SST, “Inclusion of these non-responding employers is intended to discourage employers from not reporting injury and illness information in order to avoid inspection.”

Also, if a facility is inspected, it would be comprehensive in scope. The OSHA Area Office Director would decide whether to conduct a safety or health inspection depending on the nature of the business. It could be both safety and health if a site has been inspected previously.

Click here to read more from this article by Fred Hosier of Safety News Alert. See below for the OSHA requirements on filing electronic forms:

Who: Establishments with 250 or more employees that are currently required to keep OSHA injury and illness records, and establishments with 20-249 employees that are classified in certain industries with historically high rates of occupational injuries and illnesses.

If employers in State Plan states have questions about their obligation to submit injury and illness information, please contact your State Plan office.

What: Covered establishments must electronically submit information from their 2017 OSHA Form 300A.

When: In 2018, covered establishments must submit information from their completed 2017 Form 300A by July 1, 2018. Beginning in 2019 and every year thereafter, covered establishments must submit the information by March 2.

How: OSHA will provide a secure website that offers three options for data submission. First, users will be able to manually enter data into a web form. Second, users will be able to upload a CSV file to process single or multiple establishments at the same time. Last, users of automated recordkeeping systems will have the ability to transmit data electronically via an API (application programming interface). We will provide status updates and related information here as it becomes available.

 

OSHA ACCIDENT REPORT: Employee Burned While Working On Electrical Distribution Panel

OSHA ACCIDENT REPORT: Employee Burned While Working On Electrical Distribution Panel

Accident: 104328.015Employee Is Working On An Electrical Distribution Panel And

At 2:00 p.m. on March 15, 2018, an employee was setting up to install breakers in a live 480V distribution panel at the switch gear area for an office build-out. The employee made contact with the bus bars when a screw driver fell inside the electrical panel and he suffered first, second, and third degree burns to his arm and face from an arc flash. The employee was hospitalized.

Click here for the full accident report details.

OSHA Accident Report: 38 year old worker dies after being electrocuted while servicing crane

OSHA Accident Report: 38 year old worker dies after being electrocuted while servicing crane

Accident: 103143.015 – Employee Is Electrocuted While Servicing Crane

At 10:56 a.m. on February 15, 2018, an employee was servicing an overhead crane when he was electrocuted. The employee was transported to a nearby hospital, where he was determine dead on arrival.

Click here for the full accident report details.